NC Mercury PTCA Catheter (International)
Reliable Performance Under High Pressure
The high pressure NC Mercury PTCA catheter leverages the proven high-end technology of the Mercury platform
Features
Optimal Deployment:
- Maximized wall apposition due to non-compliant balloon behavior
- Minimal balloon overhang designed to limit vessel injury during high pressure dilatation
Efficient Deliverability:
- Minimal tip flaring
- Procedural efficiency maintained through a fast deflation time
- Efficient access due to a low entry profile
Compliance Chart
| bar | kPa | 2.50 | 2.75 | 3.00 | 3.25 | 3.50 | 3.75 | 4.00 | 4.25 | 4.50 |
| 4 | 400 | 2.35 | 2.59 | 2.82 | 3.06 | 3.29 | 3.53 | 3.76 | 4.00 | 4.23 |
| 5 | 500 | 2.38 | 2.61 | 2.85 | 3.09 | 3.33 | 3.56 | 3.80 | 4.04 | 4.28 |
| 6 | 600 | 2.40 | 2.64 | 2.88 | 3.12 | 3.36 | 3.60 | 3.84 | 4.08 | 4.32 |
| 7 | 700 | 2.43 | 2.67 | 2.91 | 2.15 | 3.40 | 3.64 | 3.88 | 4.12 | 4.37 |
| 8 | 800 | 2.45 | 2.70 | 2.94 | 3.19 | 3.43 | 3.68 | 3.92 | 4.17 | 4.41 |
| 9 | 900 | 2.48 | 2.72 | 2.97 | 3.22 | 3.47 | 3.71 | 3.96 | 4.21 | 4.46 |
| 10* | 1000 | 2.50 | 2.75 | 3.00 | 3.25 | 3.50 | 3.75 | 4.00 | 4.25 | 4.50 |
| 11 | 1100 | 2.51 | 2.76 | 3.02 | 3.27 | 3.52 | 3.77 | 4.02 | 4.27 | 4.52 |
| 12 | 1200 | 2.53 | 2.78 | 3.03 | 3.28 | 3.54 | 3.79 | 4.04 | 4.30 | 4.55 |
| 13 | 1300 | 2.54 | 2.79 | 3.05 | 3.30 | 3.56 | 3.81 | 4.06 | 4.32 | 4.57 |
| 14 | 1400 | 2.55 | 2.81 | 3.06 | 3.32 | 3.57 | 3.83 | 4.08 | 4.34 | 4.60 |
| 15 | 1500 | 2.57 | 2.82 | 3.08 | 3.34 | 3.59 | 3.85 | 4.11 | 4.36 | 4.62 |
| 16 | 1600 | 2.58 | 2.84 | 3.10 | 3.35 | 3.61 | 3.87 | 4.13 | 4.39 | 4.64 |
| 17 | 1700 | 2.59 | 2.85 | 3.11 | 3.37 | 3.63 | 3.89 | 4.15 | 4.41 | 4.67 |
| 18 | 1800 | 2.61 | 2.87 | 3.13 | 3.39 | 3.65 | 3.91 | 4.17 | 4.43 | 4.69 |
| 19 | 1900 | 2.62 | 2.88 | 3.14 | 3.41 | 3.67 | 3.93 | 4.19 | 4.45 | 4.71 |
| 20** | 2000 | 2.63 | 2.90 | 3.16 | 3.42 | 3.69 | 3.95 | 4.21 | 4.48 | 4.74 |
| 21 | 2100 | 2.65 | 2.91 | 3.18 | 3.44 | 3.71 | 3.97 | 4.24 | 4.50 | 4.77 |
| 22 | 2200 | 2.66 | 2.93 | 3.20 | 3.46 | 3.73 | 4.00 | 4.26 | 4.53 | 4.80 |
| 23 | 2300 | 2.68 | 2.95 | 3.22 | 3.48 | 3.75 | 4.02 | 4.29 | 4.56 | 4.82 |
* Nominal pressure ** Rated burst pressure. Do not exceed.
Technical Information
| Balloon Material: | OptiLiance, non-compliant |
| Balloon Markers: | Platinum/Iridium, embedded |
| Shaft Diameter: | 2.0F proximal2.7F distal |
| Shaft Diameter: | 0.99 mm/0.039” (3.00 mm stent) |
| Shaft length: | 140 - 145cm |
| Lesion Entry Profile: | 0.017" |
| Nominal Pressure: | 10 bar |
| Rated Burst Pressure: | 20 bar |
| Coating: | HYDREX Coating System |
| Min. Guiding Catheter: | 5F (0.058") for 2.50-4.25mm6F (0.068") for 4.5mm |
6F (0.068") for 4.5mm
Ordering Information
| Order Number | Stent Length (mm) | Nominal Stent Diameter(mm) |
| 82123-01 | 10 | 2.50 |
| 82124-01 | 10 | 2.75 |
| 82125-01 | 10 | 3.00 |
| 82126-01 | 10 | 3.25 |
| 82127-01 | 10 | 3.50 |
| 82128-01 | 10 | 3.75 |
| 82129-01 | 10 | 4.00 |
| 82130-01 | 10 | 4.25 |
| 82131-01 | 10 | 4.50 |
| 82123-02 | 15 | 2.50 |
| 82124-02 | 15 | 2.75 |
| 82125-02 | 15 | 3.00 |
| 82126-02 | 15 | 3.25 |
| 82127-02 | 15 | 3.50 |
| 82128-02 | 15 | 3.75 |
| 82128-02 | 15 | 4.00 |
| 82130-02 | 15 | 4.25 |
| 82131-02 | 15 | 4.50 |
| 82123-03 | 20 | 2.50 |
| 82124-03 | 20 | 2.75 |
| 82125-03 | 20 | 3.00 |
| 82126-03 | 20 | 3.25 |
| 82127-03 | 20 | 3.50 |
| 82128-03 | 20 | 3.75 |
| 82128-03 | 20 | 4.00 |
| 82130-03 | 20 | 4.25 |
| 82131-03 | 20 | 4.50 |
LT2922560
