Jostent Stent Graft Peripheral

Features and Benefits

A Balloon-Expandable Solution
The stent graft is produced using the unique sandwich construction. The expandable PTFE graft material is placed between two flexible stainless steel stents. This provides seamless attachment of the graft material.

PTFE Graft Material
The PTFE graft material has been specifically developed for integrating into a stent graft system. The material is expandable in the radial direction up to four times its initial size.

Treatment For Acute Situations
The stent graft seals off the vessel wall, e.g. in perforations and ruptures, but also in aneurysms, dissections, and fistulas.

Low Profile
Depending on the diameter and profile of the chosen PTA catheter, the Peripheral Stent Graft can be crimped down to a compatibility of 7F (standard version) and of 8F (large version) introducer sheaths.* Abbott Vascular Devices generally recommends an introducer size that is two sizes larger than the sheath size advised by the manufacturer of the PTA catheter.

Flexible Diameter
Optimizes vessel fit - the stent graft can easily be adjusted to match the vessel size through post-dilatation.Provides low stockholding - one stent, six different sizes

Precise Positioning
The Peripheral Stent Graft has predictable foreshortening when expanded. This, together with high radiopacity, facilitates exact placement of the stent.

Pre-Deployment Flexibility
The flexible Plus-design enables contralateral delivery through a long introducer sheath/ guiding catheter.

Excellent Radial Strength
To ensure vessel patency the Peripheral Stent Graft has excellent radial strength when expanded.

Technical Information


Material:	High grade surgical stainless steel 316L PTFE Graft material
Recommended minimum sheath size:	Abbott Vascular Devices generally recommends an introducer size that is two size larger than the sheath size advised by the manufacturer of the PTA catheter
Wall thickness after expansion:	Standard version: 0.40 mm Large version: 0.45 mm
Minimal crimped outer diameter:	Standard version: 2.3mm = 7F Large version: 2.7 mm = 8F
Minimal deployment pressure:	4 bar

Ordering Information

Jostent Stent Graft Peripheral STANDARD
Art No.	Nominal	Length of covered segment(depending on degree of expansion)
ø 4–9 mm	Stent Length	ø 4 mm	ø 9 mm
008PG12	12 mm	10.7 mm	7.4 mm
008PG17	17 mm	15.7 mm	11.0 mm
008PG28	28 mm	25.6 mm	19.8 mm
008PG38	38 mm	35.3 mm	28.7 mm
008PG48	48 mm	45.4 mm	37.7 mm
008PG58	58 mm	54.0 mm	44.8 mm


Jostent Stent Graft Peripheral LARGE
Art No.	Nominal	Length of covered segment(depending on degree of expansion)
ø 4–9 mm	Stent Length	ø 4 mm	ø 9 mm
008PG12	12 mm	10.3 mm	7.1 mm
008PG17	17 mm	14.9 mm	11.1 mm
008PG28	28 mm	25.0 mm	19.0 mm
008PG38	38 mm	35.2 mm	26.1 mm
008PG48	48 mm	44.8 mm	33.8 mm
008PG58	58 mm	54.3 mm	40.5 mm

LT2922560

Printer Friendly