Emboshield BareWire Embolic Protection System
Emboshield
- 0.014” rapid exchange system
- Choice of 5 wire support levels
- Complete filter capture during retrieval
Features and Benefits
Designed for Choice, Safety, Confidence
With BareWire technology, the wire crosses the lesion first, independent of the filter and delivery catheter. All other actions, including filter placement and retrieval, balloon dilatations, and stent placement then occur over the wire.
- Zebra stripes - on proximal 8cm of wire to identify BareWire outside of its packaging
- 0.019" step - for filter retrieval at the end of the procedure
- 3 cm shapeable platinum tip - to aid delivery and appropriate sizing of the lesion
CHOICE
Five Different Wire Support Levels
Each available in two lengths offer lesion-specific access and support
- 190 cm
- 315 cm
SAFETY
Optimized Fit of Retrieval Catheter to Wire
Snug fit of catheter tip to wire enhances trackability and reduces the
likelihood of catching on the stent.
Retrieval Sequence
Complete Filter Encapsulation for the secure removal of debris
CONFIDENCE
 |
A: Wire lumen for free movement on BareWire B: Hydrophilic surface coating – to reduce protein and platelet adhesion C: Internal nitinol frame to deploy filter and capture debris D: Polyurethane membrane to eliminate contact between the nitinol arms and vessel intima E: 140 micron pores to allow blood flow while effectively catching embolic debris F: Radiopaque markers to improve visibility and facilitate filter placement |
Instructions for Use
Ordering Information
|
Filter Diameter (mm) |
Ordering Code |
| 3.0 | E3190-01 |
| 4.0 | E4190-01 |
| 5.0 | E5190-01 |
| 6.0 | E6190-01 |
AP2930311 Rev. A
