Jocath Maestro PTCA Catheter (International)
 |
Perfect Harmony |
Balloon
Material
The balloon material has been tailored especially to provide:
- Extremely low balloon profile
- Excellent refolding
HYDREX Coating System
The combination of different coatings in one system to optimize
performance.
The distal tip and the balloon shoulders have a highly lubricious hydrophilic coating to ensure outstanding lesion entry and crossability.
The shaft, the balloon and the guide wire lumen have JET (silicone-based) coating, delivering:
- Excellent trackability
- Outstanding guide wire movement
| Case Report: Kissing Balloon Technique, 6F (0.066") Guiding Catheter This transradial case was performed by Dr. F. Kiemeneij (OLVG Amsterdam, The Netherlands) during a live case from the Cardio Centro Ticino in Lugano (Switzerland). |
|
 |
 |
| Pre-PTCA, 3 severe lesions (Proximal and Bifurcation). | |
 |
 |
| Kissing balloon technique. Positioning and inflation of 2.5 mm and 3.0 mm Maestro balloon catheter through a 6F (0.066") guiding catheter. | |
 |
 |
| Direct stenting proximal lesion with 4.0 x 15 mm stent. | Final result post-procedure. |
Case Report
| Kissing Balloon Technique, 6F (0.066") Guiding Catheter This transradial case was performed by Dr. F. Kiemeneij (OLVG Amsterdam, The Netherlands) during a live case from the Cardio Centro Ticino in Lugano (Switzerland). |
|
|
|
| Pre-PTCA, 3 severe lesions (Proximal and Bifurcation). | |
|
|
| Kissing balloon technique. Positioning and inflation of 2.5 mm and 3.0 mm Maestro balloon catheter through a 6F (0.066") guiding catheter. | |
|
|
| Direct stenting proximal lesion with 4.0 x 15 mm stent. | Final result post-procedure. |
Technical Information
| Balloon Material: | BM2 |
| Balloon Compliance: | Semi-compliant |
| Shaft Diameter: | 2.0F proximal 2.7F distal for Ø 1.5 - 4.0 mm 3.0F distal for Ø 4.5 - 5.0 mm |
| Shaft Length: | 140 - 145 cm for Ø 1.5 - 4.0 mm 150 - 155 cm for Ø 4.5 - 5.0 mm |
| Lesion Entry Profile: | 0.017" for Ø 1.5 - 4.0 mm 0.018" for Ø 4.5 - 5.0 mm |
| Balloon Profile: | 0.028" for 3.0 mm Balloon Diameter |
| Nominal Pressure: | 8 bar |
| Rated Burst Pressure: | 14 bar |
| Average Burst Pressure: |
22 bar |
| Coating: | HYDREX Coating System |
| Min. Guiding Catheter: | 5F (0.058") Ø 1.5-4.0 mm 6F (0.068") Ø 4.5-5.0 mm |
Ordering Information
| Order Number |
Balloon Length |
Balloon Diameter |
Radio Opaque Markers |
| M11145 | 11 mm | 4.5 mm | 2 |
| M11150 | 11 mm | 5.0 mm | 2 |
| M11445 | 14 mm | 4.5 mm | 2 |
| M11450 | 14 mm | 5.0 mm | 2 |
| M12045 | 20 mm | 4.5 mm | 2 |
| M12050 | 20 mm | 5.0 mm | 2 |
| M12920 | 29 mm | 2.0 mm | 2 |
| M12925 |
29 mm | 2.5 mm | 2 |
| M12930 | 29 mm | 3.0 mm | 2 |
| M12935 | 29 mm | 3.5 mm | 2 |
| M12940 | 29 mm | 4.0 mm | 2 |
LT2922560
