MULTI-LINK PIXEL Coronary Stent System (International)
Think Small — Perform Big
MULTI-LINK PIXEL Coronary Stent System is designed to address the challenges of small vessel treatment.
Features
Minimum Implant, Maximum Success
- Based on clinically proven MULTI-LINK corrugated ring design
- Less metal – circumferential coverage reduced to 5 crests and reduced strut thickness
- Excellent conformability, scaffolding and support
- Low recoil
- Optimal radiopacity for small vessel visualization
Tailored Delivery and Deployment
- High system flexibility for small vessel access
- GRIP Technology for excellent stent retention, smooth surface transitions and protection of stent edges
- Lubricious hydrophilic coating on distal shaft, balloon tapers and catheter tip for smooth tracking
- Low compliance for controlled and accurate deployment
- S.T.E.P. (Short Transitional Edge Protection) Technology minimizes the amount of vessel dilated outside the stent and provides uniform stent expansion
Specifications
|
Stent Diameter (mm) |
8 (mm) |
13 (mm) |
18 (mm) |
23 (mm) |
28 (mm) |
| 2.0 | x | x | x | x | x |
| 2.25 | x | x | x | x | x |
| 2.5 | x | x | x | x | x |
Catheter Working Length = 143 cm. For all Sizes and Lengths: RBP = 16 atm. 5F (0.056") Guiding Catheter Compatibility in ALL Sizes. Maximum Guide Wire = 0.014"
LT2922560
