This web site is not optimized for Internet Explorer 6. You may notice
decreased functionality compared to other web browsers. Please follow the
link below to upgrade to a new version of Internet Explorer.

The "Yes" link below will take you out of the Abbott Laboratories family of websites.
Links which take you out of Abbott Laboratories worldwide web sites are not under the
control of Abbott Laboratories, and Abbott Laboratories is not responsible for the
contents of any such site or any further links from such site. Abbott Laboratories is
providing these links to you only as a convenience, and the inclusion of any link does
not imply endorsement of the linked site by Abbott Laboratories.

Do you wish to leave this site?
 
Coronary Dilatation Catheters

NC MERCURY PTCA Catheter

Indications & Important Safety Information ››
 

 

Overview

nc mercuryReliable Performance Under High Pressure

The high pressure NC MERCURY PTCA catheter leverages the high-end technology of the Mercury platform.

Features
Chart

Superb Deployment*

  • Maximized wall apposition due to non-compliant balloon behavior
  • Minimal balloon overhang designed to limit vessel injury during high pressure dilatation

Efficient Deliverability*

  • Minimal tip flaring
  • Procedural efficiency maintained through a fast deflation time
  • Efficient access due to a low entry profile

 

*Tests performed by and data on file at Abbott Vascular.

Specifications

Compliance Chart*

barkPa2.502.753.003.253.503.754.004.254.50
4 400 2.35 2.59 2.82 3.06 3.29 3.53 3.76 4.00 4.23
5 500 2.38 2.61 2.85 3.09 3.33 3.56 3.80 4.04 4.28
6 600 2.40 2.64 2.88 3.12 3.36 3.60 3.84 4.08 4.32
7 700 2.43 2.67 2.91 2.15 3.40 3.64 3.88 4.12 4.37
8 800 2.45 2.70 2.94 3.19 3.43 3.68 3.92 4.17 4.41
9 900 2.48 2.72 2.97 3.22 3.47 3.71 3.96 4.21 4.46
10 1000 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50
11 1100 2.51 2.76 3.02 3.27 3.52 3.77 4.02 4.27 4.52
12 1200 2.53 2.78 3.03 3.28 3.54 3.79 4.04 4.30 4.55
13 1300 2.54 2.79 3.05 3.30 3.56 3.81 4.06 4.32 4.57
14 1400 2.55 2.81 3.06 3.32 3.57 3.83 4.08 4.34 4.60
15 1500 2.57 2.82 3.08 3.34 3.59 3.85 4.11 4.36 4.62
16 1600 2.58 2.84 3.10 3.35 3.61 3.87 4.13 4.39 4.64
17 1700 2.59 2.85 3.11 3.37 3.63 3.89 4.15 4.41 4.67
18 1800 2.61 2.87 3.13 3.39 3.65 3.91 4.17 4.43 4.69
19 1900 2.62 2.88 3.14 3.41 3.67 3.93 4.19 4.45 4.71
20 2000 2.63 2.90 3.16 3.42 3.69 3.95 4.21 4.48 4.74
21 2100 2.65 2.91 3.18 3.44 3.71 3.97 4.24 4.50 4.77
22 2200 2.66 2.93 3.20 3.46 3.73 4.00 4.26 4.53 4.80
23 2300 2.68 2.95 3.22 3.48 3.75 4.02 4.29 4.56 4.82

 

 

Technical Information*

Balloon Material: OptiLiance, non-compliant
Balloon Markers: Platinum/Iridium, embedded
Shaft Diameter: 2.0F proximal 2.7F distal
Shaft length: 140 - 145cm
Lesion Entry Profile: 0.017"
Nominal Pressure: 10 bar
Rated Burst Pressure: 20 bar
Coating: HYDREX Coating System
Min. Guiding Catheter: 5F (0.058") for 2.50-4.25mm 6F (0.068") for 4.5mm

 

† Nominal pressure
‡ Rated burst pressure
* Tests performed by and data on file at Abbott Vascular.

Ordering Information
Order NumberStent Length (mm)Nominal Stent Diameter(mm)
82123-01 10 2.50
82124-01 10 2.75
82125-01 10 3.00
82126-01 10 3.25
82127-01 10 3.50
82128-01 10 3.75
82129-01 10 4.00
82130-01 10 4.25
82131-01 10 4.50
82123-02 15 2.50
82124-02 15 2.75
82125-02 15 3.00
82126-02 15 3.25
82127-02 15 3.50
82128-02 15 3.75
82128-02 15 4.00
82130-02 15 4.25
82131-02 15 4.50
82123-03 20 2.50
82124-03 20 2.75
82125-03 20 3.00
82126-03 20 3.25
82127-03 20 3.50
82128-03 20 3.75
82128-03 20 4.00
82130-03 20 4.25
82131-03 20 4.50

AP2932858 Rev. A

 

Indications and Important Safety Information

Top

Top